Lab 06 · Cisco Modeling Labs

DMVPN IKEv1 with a front-door VRF

IPv4 only. Phase 3 DMVPN with IKEv1. The front-door VRF INET holds the underlay on the hub and the spokes. Transit is INET, ISP1, and ISP2. The overlay is 10.9.0.0/24 in VRF INET, protected with IPsec, and routed with named EIGRP AS 200.

IKEv1 DMVPN lab: HUB and spokes SPOKE1, SPOKE2, and SPOKE3, with underlay transit through INET, ISP1, and ISP2 in a front-door VRF.

What the drawing is showing

HUB, SPOKE1, SPOKE2, and SPOKE3 share that overlay. Tunnel addresses are 10.9.0.1 on the hub and 10.9.0.11, 10.9.0.12, and 10.9.0.13 on the spokes, with LANs 10.1.0.0/24, 10.3.1.0/24, 10.3.2.0/24, and 10.3.3.0/24. The mGRE overlay is the dashed path and requires IPsec. Phase 3 redirect and shortcut are what let spokes build a direct path. The WAN transit through INET, ISP1, and ISP2 stays in the front-door VRF. Built in Cisco Modeling Labs. Pre-shared keys are not published.

Covered here

  • IKEv1
  • Front-door VRF INET
  • mGRE
  • Phase 3 shortcut
  • Named EIGRP

All labs · MPLS L3VPN with DMVPN Phase 3 · DMVPN IKEv2 dual-hub, dual-cloud