Lab 04 · Cisco Modeling Labs

eBGP and iBGP with route reflectors

IPv4 only. AS 65000 runs iBGP over loopbacks, with RR1 and RR2 in cluster 10.255.0.100. R1 through R4 are clients and peer only with the two reflectors. EXT-A (AS 65101) is eBGP on R1, and EXT-B (AS 65102) is eBGP on R4.

BGP lab: EXT-A peered to R1, EXT-B peered to R4, and iBGP clients R1 through R4 homed to route reflectors RR1 and RR2.

What the drawing is showing

The underlay is OSPF area 0 and is pre-configured. iBGP sessions use the 10.255.0.x loopbacks. R1 and R4 set next-hop-self toward the route reflectors, so the external next hop does not have to be in every client's table. R2 and R3 are clients as well, each dual-homed to RR1 and RR2. EXT-A sits on 198.51.100.0/24 and 11.1.1.0/24; EXT-B sits on 203.0.113.0/24 and 22.2.2.0/24. Built in Cisco Modeling Labs with an automated grader. Policy answers are not published.

Covered here

  • eBGP
  • iBGP
  • Route reflectors
  • Cluster-id
  • Next-hop-self

All labs · OSPF and EIGRP redistribution · MPLS L3VPN with DMVPN Phase 3